-
Customizable sisal buffing wheels ,polishing waxes and cotton polishing wheels -
Nylon fiber polishing wheels non-woven buffing wheels -
we are selling all kind of abrasive products
<
>
Single Speed Grinder
The two-head grinding machine is a traditional (single speed) polishing machine that is economical and easy to operate. It has two workstations for two people to polish simultaneously; The coils in the motor are all made of copper wire, which increases the lifespan of the motor; The factory design is a tapered threaded shaft with self-locking function, which can also be modified into a clamp shaft according to needs, making it convenient and flexible. It is the preferred polishing machine for low-cost polishing.
Specification name | ||||||
Motor Power | 1.5KW | 2.2KW | 3KW | 4KW | 5.5KW | 7.5KW |
weight | 30kg | 32kg | 48kg | 52kg | 80kg | 84kg |
Rotating speed | 2860r/min | 2860r/min | 2900r/min | 2900r/min | 2900r/min | 2900r/min |
Machine size | 1100mm*400mm*390mm(length*width*height) | |||||
Two Speed Grinder
The two-speed grinding machine (dual speed) combines the coils of two speeds into a motor casing on the basis of a single speed machine, achieving the effect of one machine with two speeds. The machine is polished at the appropriate speed through a rotary switch, making it more flexible.
Specification name | ||||
Motor Power | 2.2KW | 3kw | 4KW | 5.5KW |
weight | 65kw | 80KW | ||
Rotating speed | 1420r/min | 2900r/min | 2900r/min | |
Machine size | 1200mm*400mm*390mm(长*宽*高）(length*width*height) | |||
Splint threaded shaft
The conventional middle hole is 25MM shaft diameter, and the conventional maximum width is 50MM. The polishing wheel is clamped by the splint and the nut is locked. Compatible with most polishing wheels.
Two-speed grinder overview:
Two-speed is based on the single-speed machine, the two-speed coils are combined in one electric shell to achieve the effect of one machine with two speeds, and the machine is more flexible by selecting the appropriate speed for polishing by rotating the machine.
Installation and Precautions
1. Before installation and use, check whether the grinder is damaged during transportation and storage. For example, whether the circuit line is connected well, whether the equipment bolts are loose, etc.
2. When wiring, the line with the grounding mark must be reliably grounded, and a leakage protection device and a switch (prepared by the user) should be installed on the power supply line. If it is used far away from the main power supply cabinet, the transmission line should be appropriately thickened to avoid excessive line voltage drop and affect normal use.
3. This machine adopts three-phase five-wire (A, B, C, zero wire,) wiring mode. Therefore, the main power protector should not only have a three-phase leakage protection switch, but should be connected to the grounded distribution box, and the main switch in the distribution box should adopt three-phase four-wire leakage protection.
4. When the grinder needs to be moved due to maintenance or cleaning, the power should be cut off before proceeding to the next step.
