How to pay attention to the maintenance of the automatic polishing machine when overhauling

Because, the inverter is installed in the electric control cabinet, about the power drive equipment of the turbine motor, is a static equipment composed of semiconductor devices as the center, temperature, dust, sensation and other application environment will affect the aging and life of the product, therefore, it is necessary to ensure that the electric control cabinet is clean, clean and dust-free, so on weekends, the electric control cabinet should generally be cleaned and maintained, generally use Pishan Jun to blow off the dust in the inverter.

When polishing the polishing machine, the specimen grinding surface and the polishing disc should be parallel and evenly pressed on the polishing disc, pay attention to prevent the specimen from flying out and new wear marks due to too much pressure, the automatic polishing machine should also make the specimen rotate and move back and forth along the radius of the turntable, so as to prevent the polishing fabric from partially wearing too fast In the polishing process, the micronized suspension should be continuously increased, so that the polishing fabric insists on certain humidity, the humidity is too large to weaken the grinding effect of polishing, so that the hard phase in the specimen is convex and non-metallic inclusions in steel and graphite phase in cast iron occur." Tail dragging phenomenon, the humidity is too small, due to the conflict heat generation will heat up the specimen, the smoothing effect will be reduced, the grinding surface will lose its luster, and even show black spots, and the light alloy will throw the appearance.

Do a good job of protecting the automatic polishing machine to ensure the normal operation of the equipment, reduce the wear of the product, and extend the service life of the equipment.

Therefore, the daily protection and maintenance of the automatic polishing machine is also very important, we can only reduce the wear and tear of the equipment, reduce the protection cost and other abnormal costs in the life cycle of the equipment.

Automatic polishing machine.

The shorter the service life, the higher the reliability of the automatic polishing machine, the longer the service life, and the lower the reliability.
The shorter the service life, the higher the reliability of the automatic polishing machine, the longer the service life, and the lower the reliability.

The automatic polishing machine simply presents a malfunction, and when the equipment is seriously worn, it is necessary to tell the technical department in an urgent situation and deal with it as soon as possible.

Although the structure is different automatic polishing machine operation is simple, but also pay attention to the operation time: when the automatic polishing machine operation time is long, the polishing wheel has a high frictional thermal temperature, easy to burn the leather surface, need to be closed and then operated.

Before and after the operation of the automatic polishing machine, the surface of the polishing wheel should be cleaned and waxed to make the product white and flawless.